The Trakka

The Trakka
The Track Machine

Download GA Drawing (PDF)

TRACK MACHINE SPECIFICATION SERIES 4190HTR – 1000HP WOOD WASTE MILL

TOTAL MASS
42 tonnes
LENGTH
14.35 metres
WIDTH
3.0 metres
HEIGHT
3.6 metres
TRACKS
  • REDBACK SPEC TRACK FRAMES,
  • BONFIGLIOLI/REXROTH DRIVES,
  • KOMATSU/BERCO TRACK GEAR
ENGINE
  • CAT 3412 – 1000HP
  • 24v starting system,
  • 35 AMP alternator,
  • safety shutoffs for low oil pressure and high water temperature.
FUEL TANK
1500 Litres
CLUTCH
PT Tech HPTO 15 wet Clutch
BELT DRIVE
8V Kevlar Belt Drive
MILL
13 disc x 6 pin rotor running 24 fixed hammers with replaceable tips.
HYDRAULICS
Rexroth variable displacement pump set and 24v electric solenoids driving radial piston motors, tank capacity 500 litres.
OVERLOAD PROTECTION
Electrically monitoring blocked hydraulic filter, low hydraulic oil level, high hydraulic oil temperature and mill under speed conditions.
INSTRUMENTATION
Hourmeter, voltmeter, tachometer, oil pressure and water temperature gauges.
CONTROL
Remote push button transmitter. Programmable PLC Infeed Control & Diagnostic System
INFEED CONVEYOR
Steel slats 1570 wide, speed adjustable.
FEED WHEEL
Aggressive multi-toothed 1000 dia. 950 opening height, speed adjustable.
OUTFEED CONVEYOR
  • 2 rubber belts 1500 wide,
  • cleated inclined belt,
  • discharge height 4.3 Metres.
  • Belt speed – 115 metres/minute.

CONSUMABLES-FREQUENCY/COST & RUNNING COST ESTIMATES

GREEN WASTE MILLS OPERATING COSTS
MACHINE: 6190T –700HP TO 1000HP (TRACK MACHINE)
ITEM DETAILS COST TYPICAL LIFE COST/HOUR
Hammer Tips Replace 24 @ $ 180.00 ea
200hrs
$21.60
Hammers Replace 24 @ $ 400.00 ea
2,000 hrs
$4.80
Screen Replace 1 set @ $ 3,500.00
500 hrs
$7.00
Liners Replace 1 set @ $ 2,200.00
1000 hrs
$2.20
O/F Conveyor Belt Replace 1 set @ $ 8,320.00
4,000 hrs
$2.08
I/F Head Shaft Replace 1 @ $ 2,500.00
4,000 hrs
$0.63
I/F Conveyor Slats Replace 1@ $ 11,000.00
3,000 hrs
$3.66
Anvil Replace $1,920.00
500 hrs
$3.84
Fluid Coupling Service $100.00
250 hrs
$0.40
Cat Engine Service Service $500.00
150 hrs
$3.33
Cat Engine R & M   $40,000.00
8,000 hrs
$5.00
Hydraulic Motor Replace 1 @ $ 2,000.00
2,000 hrs
$1.00
Hoses Maintenance 1 @ $ 2,000.00
2,000 hrs
$1.00
Electrics Maintenance 1 @ $ 1,000.00
2,000 hrs
$0.50
Conveyor Pulleys Replace 1@ $1,470.00
2,000 hrs
$0.74
General Maintenance Maintenance  
$20.00
Fuel 65 Litres p/h  
$90.00
TOTAL
$167.77

**Disclaimer: Actual Operating Costs will vary depending on Machine Maintenance, Operator Handling, Operating conditions, Machine usage and materials used.

Fuel & Replacement Parts are priced as at 1 July 2006 and are subject to change dependant on oil prices & spare parts market prices

This information is intended as a guide for comparison purposes within the Redback Machine Range only.